• 𝙎𝙢𝙖𝙧𝙩 0.4-4 Amp(Depend on voltage) 4-in-1 Battery Charger & Tester: Smart 4-in-1 battery charger & tester compacted pocket battery tool, Charger,discharger,analyzer,Maintainer!Compatible with all 2v-18V lead-acid ,deep-cycle batteries: flooded, gel, AGM, maintenance-free, WET, CAL, EFB,4.2v- 18V lithium-ion, LiFePO4 batteries.2V-18V Ni-Mh Ni-Cd battery.

• 𝙋𝙧𝙤𝙛𝙚𝙨𝙨𝙞𝙤𝙣𝙖𝙡 𝘽𝙖𝙩𝙩𝙚𝙧𝙮 𝙏𝙚𝙨𝙩𝙚𝙧: M6018 is also a car battery tester can display a pre- testing for battery State of Health, which shows battery internal resistance and give a rough estimate for battery condition and life, which will alert end user to replace battery in time in case for some condition that battery sudden break down may cause big problem or loss..

• 𝙐𝙣𝙞𝙫𝙚𝙧𝙨𝙖𝙡 𝙗𝙖𝙩𝙩𝙚𝙧𝙮 𝙩𝙤𝙤𝙡 𝙛𝙤𝙧 𝙝𝙤𝙢𝙚/𝙗𝙪𝙨𝙞𝙣𝙚𝙨𝙨 𝙪𝙨𝙚: User can choose to charge or discharge battery voltage from 2V -18V, cover LiFePo4, Li-ion,Pb-acid/lead acid, Ni-Mh,Ni-Cd battery , which is very convenient for engineer or workshop to easy to test and repair a battery pack, no need so many chargers prepared, there is no such Four functions covering four types of batteries in the market yet.

• 𝙎𝙖𝙛𝙚𝙩𝙮 𝙬𝙞𝙩𝙝 𝙛𝙪𝙡𝙡 𝙥𝙧𝙤𝙩𝙚𝙘𝙩𝙞𝙤𝙣: With the M6018's smart safety features, your battery will be protected against reverse polarity, sparks, short circuits, overheating and overvoltages. The M6018 battery tool features a rugged ABS housing that can be used in high temperatures and humid environments. The tool is water and dust resistant with IP65 rated protection to handle suboptimal work environments and keep users safe.

• ɢʀᴇᴀᴛ ᴜɴɪᴠᴇʀsᴀʟ ʙᴀᴛᴛᴇʀʏ ᴛᴇsᴛᴇʀ, can easily check battery voltage,internal-resistance,SOC and SOH within 5 seconds, SOC: state of charge battery, 0-100% ;SOH: State of health of battery, 0-100%,this is a rough testing, for accurate SOC and SOH, better to use maintenance function to run a cycle to check. Very good to be used in some lab or workshop for battery testing and home ,Always have a universal battery tester at home

𝙎𝙥𝙚𝙘𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣: 𝙄𝙩𝙚𝙢:𝙈𝟲𝟬𝟭𝟴 𝘼𝘾 𝙄𝙣𝙥𝙪𝙩: 𝟭𝟬𝟬-𝟮𝟰𝟬𝙑 𝘼𝘾 𝟱𝟬-𝟲𝟬𝙃𝙕 𝙎𝙪𝙞𝙩𝙖𝙗𝙡𝙚 𝘽𝙖𝙩𝙩𝙚𝙧𝙮: 𝙋𝙗-𝘼𝙘𝙞𝙙(𝘼𝙂𝙈,𝙑𝙍𝙇𝘼,𝙎𝙇𝘼 𝘼𝙘𝙞𝙙,𝙂𝙀𝙇),𝙇𝙞-𝙞𝙤𝙣,𝙇𝙞𝙁𝙚𝙋𝙊𝟰,𝙉𝙞𝙈𝙝,𝙉𝙞𝘾𝙙 𝘾𝙝𝙖𝙧𝙜𝙞𝙣𝙜 𝙈𝙚𝙩𝙝𝙤𝙙:𝙋𝙧𝙚𝙘𝙝𝙖𝙧𝙜𝙚—𝘾𝘾 𝙢𝙖𝙞𝙣 𝙘𝙝𝙖𝙧𝙜𝙚—𝙎𝙥𝙚𝙘𝙞𝙖𝙡 𝙘𝙝𝙖𝙧𝙜𝙚 𝘾𝙑 𝙤𝙧 𝘾𝘾—𝙀𝙣𝙙 𝙘𝙝𝙖𝙧𝙜𝙚 

𝙎𝙪𝙞𝙩𝙖𝙗𝙡𝙚 𝙗𝙖𝙩𝙩𝙚𝙧𝙮 𝙘𝙖𝙥𝙖𝙘𝙞𝙩𝙮:𝟭-𝟰𝟬𝘼𝙝 𝙎𝙪𝙞𝙩𝙖𝙗𝙡𝙚 𝙗𝙖𝙩𝙩𝙚𝙧𝙮 𝙫𝙤𝙡𝙩𝙖𝙜𝙚:𝟮.𝟬-𝟭𝟲𝙑 (𝟮𝟰𝙑 𝙥𝙖𝙘𝙠, 𝙘𝙖𝙣 𝙤𝙣𝙡𝙮 𝙥𝙧𝙤𝙫𝙞𝙙𝙚 𝙩𝙚𝙨𝙩 𝙛𝙪𝙣𝙘𝙩𝙞𝙤𝙣, 𝙘𝙖𝙣 𝙣𝙤𝙩 𝙘𝙝𝙖𝙧𝙜𝙚 𝙞𝙩) 𝘾𝙝𝙖𝙧𝙜𝙚/𝘿𝙞𝙨𝙘𝙝𝙖𝙧𝙜𝙚 𝙫𝙤𝙡𝙩𝙖𝙜𝙚 𝙧𝙖𝙣𝙜𝙚:𝟮-𝟭𝟴𝙑 𝘾𝙝𝙖𝙧𝙜𝙞𝙣𝙜 𝙘𝙪𝙧𝙧𝙚𝙣𝙩: 𝟬.𝟰𝘼-𝟰𝘼 (𝘿𝙚𝙥𝙚𝙣𝙙 𝙤𝙣 𝙫𝙤𝙡𝙩𝙖𝙜𝙚) 

𝘿𝙞𝙨𝙘𝙝𝙖𝙧𝙜𝙞𝙣𝙜 𝙘𝙪𝙧𝙧𝙚𝙣𝙩:𝟬.𝟮𝘼-𝟮𝘼(𝘿𝙚𝙥𝙚𝙣𝙙 𝙤𝙣 𝙫𝙤𝙡𝙩𝙖𝙜𝙚) 

𝙏𝙚𝙢𝙥𝙚𝙧𝙖𝙩𝙪𝙧𝙚 𝘾𝙤𝙢𝙥𝙚𝙣𝙨𝙖𝙩𝙞𝙤𝙣:𝘼𝙪𝙩𝙤 𝙘𝙤𝙢𝙥𝙚𝙣𝙨𝙖𝙩𝙞𝙤𝙣 𝙘𝙝𝙖𝙧𝙜𝙚 𝙫𝙤𝙡𝙩𝙖𝙜𝙚 𝙖𝙘𝙘𝙤𝙧𝙙𝙞𝙣𝙜 𝙩𝙤 𝙚𝙣𝙫𝙞𝙧𝙤𝙣𝙢𝙚𝙣𝙩 𝙩𝙚𝙢𝙥𝙚𝙧𝙖𝙩𝙪𝙧𝙚 

𝙑𝙤𝙡𝙩𝙖𝙜𝙚 𝙩𝙚𝙨𝙩 𝙥𝙧𝙚𝙘𝙞𝙨𝙞𝙤𝙣: + -𝟭% 

𝙋𝙧𝙤𝙩𝙚𝙘𝙩𝙞𝙤𝙣: 𝙨𝙝𝙤𝙧𝙩𝙚𝙙,𝙧𝙚𝙫𝙚𝙧𝙨𝙚𝙙,𝙊𝙫𝙚𝙧 𝙫𝙤𝙡𝙩𝙖𝙜𝙚, 𝙤𝙫𝙚𝙧 𝙘𝙪𝙧𝙧𝙚𝙣𝙩, 𝙤𝙫𝙚𝙧 𝙩𝙚𝙢𝙥𝙚𝙧𝙖𝙩𝙪𝙧𝙚 

𝙎𝙞𝙯𝙚: 𝟭𝟲𝟬𝙭𝟴𝟴𝙭𝟯𝟱𝙢𝙢 𝙒𝙚𝙞𝙜𝙝𝙩: 𝟮𝟴𝟬𝙜 𝙎𝙖𝙛𝙚𝙩𝙮 𝙎𝙩𝙖𝙣𝙙𝙖𝙧𝙙: 𝘾𝙀 𝙀𝙉𝟲𝟮𝟯𝟲𝟴 𝙀𝙉𝟲𝟭𝟬𝟬𝟬 

𝙉𝙊𝙏𝙀: 𝙒𝙚 𝙖𝙧𝙚 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙚𝙧 battery charger 𝙩𝙤𝙤, 𝙬𝙚𝙡𝙘𝙤𝙢𝙚 𝙩𝙤 𝙗𝙚 𝙤𝙪𝙧 𝘿𝙚𝙖𝙡𝙚𝙧 𝙤𝙧 𝘼𝙜𝙚𝙣𝙩 𝙛𝙧𝙤𝙢 𝙙𝙞𝙛𝙛𝙚𝙧𝙚𝙣𝙩 𝙖𝙧𝙚𝙖𝙨 Are you looking for a reliable battery tester that can handle various types of batteries, including household, automotive, and marine batteries? Look no further than our Battery Analyzer!car battery monitor，12v battery tester，6 volt battery tester，lithium battery internal resistance tester，battery monitor，atv tester，battery load tester，circuit tester automotive，12v battery monitor，vehicle battery tester，battery voltage meter，marine battery tester，battery drain or tester，battery capacity tester