home > Products > Li-ion LiFePo4 Charger> 48V LiFePo4 battery pack Balancer charger
2223 | 48V LiFePo4 battery pack Balancer charger
48V LiFePo4 battery pack Balancer charger

48V LiFePo4 battery pack Balancer charger

  • Item Number:2223

48V iron lithium battery pack intelligent equalization module


Suitable battery type: 16 series lithium iron phosphate battery pack


Suitable battery capacity: 100~400Ah


Maximum charging equalizing current of the module: 16 X 20A


Maximum discharge equalizing current of the module: 16 X 20A


Single module DCDC conversion efficiency: 85%


Cell temperature detection: 16 channel NTC independent sampling


Overcharge and over discharge voltage and current valve settings: can be set through background software


Battery pack charge and discharge solid-state relay rated current: 120A


Remote client communication method: 4G or WLAN wireless transmission


Client opening function: real-time transmission of the effective capacity and working status of each cell in the current system, and review of historical work logs; The load switch can be turned on or off remotely


询价与手机短信资讯

Design principle:




*The BM3000 system is different from traditional passive design schemes in that it mainly adopts different active balancing strategies for different operating modes of charging and discharging:


*When charging, the overall high current main charge is used first. When the voltage of any single battery in the system reaches the upper limit of charging protection, the main charge is cut off, and the high-efficiency built-in DCDC module is used to separately equalize the charge of each single battery cell. The traditional battery BMS simply cuts off the main charge and stops. This not only can quickly replenish the energy of the battery pack, but also can independently and evenly charge each battery cell.


*When discharging, the strategy of "robbing the rich to help the poor" is adopted. A small portion of energy is extracted from the entire battery, and injected into a single cell with a lower capacity through an efficient DCDC module. This can be understood as making the output of a battery with a larger capacity relatively larger, while the output of a battery with a smaller capacity relatively smaller, to achieve the maximum discharge potential of the entire battery, which can extend the discharge time without over discharging any one cell.






Main functions of the BM3000 system:




*The BM3000 48V lithium iron battery pack intelligent balancing system is specially designed for supporting 5G base stations with 16 strings of 48V 200AH lithium iron phosphate battery packs.


*Using this system can ensure that each battery cell in the battery pack is in the optimal state of energy balance. Regardless of whether the voltage or capacity of this monomer is consistent with that of other monomers, this system can ensure that each monomer is in the optimal state of charge and discharge, ensuring that each monomer is not overcharged or discharged, and that the energy of each monomer can play a role.


*The BM3000 is designed with an integrated structure, which is very simple to install and use. It supports multiple functions such as remote background management on the Internet cloud, battery status information collection, and remote setting of charging and discharging parameters.


*For new battery packs, the BM3000 can protect each cell from overcharging and discharging from the beginning, significantly improving the battery's service life, enabling the entire battery pack to reach a service life of more than 6 years.


*For applications where the consistency of the individual cells of the battery pack is not very good, such as energy storage battery packs composed of cascaded batteries that have been rolled back from electric vehicles, the BM3000 can provide excellent balanced management effects.


Principio de diseño:




* El sistema bm3000 es diferente del esquema de diseño pasivo tradicional, principalmente para diferentes modos de trabajo de carga y descarga con diferentes estrategias de equilibrio activo:


* al cargar, se utiliza la carga principal de alta corriente integral primero. cuando el voltaje de cualquier batería individual en el sistema alcanza el límite superior de protección de carga, se corta la carga principal y se transfiere a la carga equilibrada separada de cada batería individual con un módulo dcdc incorporado de alta eficiencia. el BMS tradicional de la batería solo corta La carga principal y se detiene. Esto no solo puede reponer rápidamente la energía de la batería, sino también llenar cada batería de forma independiente y equilibrada.


* al descargar, se adopta la estrategia de "robar a los ricos y ayudar a los pobres", extraer una pequeña parte de la energía de todo el Grupo de baterías, inyectar en baterías individuales de menor capacidad a través de módulos dcdc eficientes, lo que puede entenderse como hacer que las baterías de mayor capacidad tengan una producción relativamente grande y las baterías de menor capacidad tengan una producción relativamente pequeña, logrando el potencial máximo de descarga de todo el Grupo de baterías, que no sólo puede prolongar el tiempo de descarga, sino también no sobrecargar ninguna batería.






Las principales funciones del sistema bm3000 son:




* El sistema de equilibrio inteligente de la batería de fosfato de hierro y litio bm3000 48v se especializa en 16 cadenas de baterías de fosfato de hierro y litio 48v 200ah en la Estación base 5g.


* El uso de este sistema permite que cada unidad de la batería esté en el mejor estado de equilibrio energético, independientemente de si el voltaje o la capacidad del monómero es consistente con otros monómeros, este sistema puede mantener a cada monómeros en el mejor estado de carga y descarga, lo que no sólo garantiza que cada monómeros no esté sobrecargado, sino que También permite que la energía de cada monómeros funcione.


* El bm3000 adopta un diseño estructural integrado, la instalación y el uso son muy simples, soportando la gestión remota de fondo de la nube de internet, la adquisición de información sobre el Estado de la batería, la configuración remota de los parámetros de carga y descarga y otras funciones.


* para las nuevas baterías, el bm3000 puede proteger cada batería desde el principio, pero no puede cargar y descargar en exceso, lo que mejora significativamente la vida útil de la batería y puede hacer que toda la batería alcance una vida útil de más de 6 años.


* para aplicaciones en las que la consistencia de los monómeros de la batería no es muy buena, como la batería de almacenamiento de energía combinada con baterías escalonadas que se retiran del vehículo eléctrico, el bm3000 puede desempeñar un excelente efecto de gestión equilibrada.


 Принцип проектирования: 




 * Система BM3000 отличается от традиционного пассивного дизайна, применяя различные стратегии активного равновесия для различных режимов работы зарядки и разрядки: 


 * При зарядке используется первая полная основная зарядка большого тока, когда напряжение любой однокорпусной батареи в системе достигает верхнего предела защиты от зарядки, отключите основную зарядку и перейдите к индивидуальной сбалансированной зарядке каждого одиночного сердечника с помощью высокоэффективного встроенного модуля DCDC. Традиционная батарея BMS просто отключает основную зарядку и останавливается.  Это позволяет быстро пополнять энергию батареи и заполнять каждый энергосберегающий сердечник независимо и равномерно. 


 * При разрядке используется стратегия « ограбить богатство и помочь бедным», извлекать небольшую часть энергии из всей батареи, через высокоэффективный модуль DCDC, впрыскивать в один стержень с более низкой емкостью, можно понять, что мощность батареи с большой емкостью относительно велика, а мощность батареи с небольшой емкостью относительно мала, чтобы реализовать максимальный потенциал разряда всей батареи, как продлить время разряда, так и не перегружать ни один энергосберегающий сердечник. 






 Основные функции системы BM3000: 




 * Интеллектуальная балансировочная система для железо - литиевых аккумуляторных батарей BM3000 48V предназначена для обслуживания 16 серий фосфатных железо - литиевых батарей 48V 200AH на базовых станциях 5G. 


 * Данная система обеспечивает оптимальное энергетическое равновесие для каждого элемента батареи в батарее, независимо от того, соответствует ли напряжение или емкость этого мономера напряжению или емкости других мономеров, эта система позволяет каждому монотелу находиться в оптимальном состоянии зарядки и разрядки, обеспечивая, чтобы каждый мономер был полностью заполнен и активирован и чтобы энергия каждого отдельного тела работала. 


 * BM3000 имеет интегрированную конструкцию, очень простую установку и поддерживает множество функций, таких как удаленное фоновое управление в облаке Интернета, сбор информации о состоянии батареи, дистанционная настройка параметров зарядки и разрядки. 


 * Для новых батарей BM3000 может защитить каждый энергосберегающий сердечник от перезарядки с самого начала, значительно увеличивая срок службы батареи и позволяя всей батарее работать более 6 лет. 


 * BM3000 обеспечивает превосходное равновесие в области управления в тех случаях, когда отдельные элементы аккумуляторной батареи не очень хорошо согласованы, таких как аккумуляторная батарея, состоящая из ступенчатых батарей, которые поворачиваются от электромобиля. 


product
^