Input: AC 100~240V
Output: 6.4V 2A
Charge Process: -dV detect, >=5mV/cell
Charger Indicator: Red charging, Green Fully charged
Output Protections: Short Circuit, reverse protection
Safety Approval: CE cUL PSE
Size: 83 x 43 x 30mm
Suit for Battery: 3.6~4.8 Volt (3~4Cells) 2~10Ah NIMH/NICD Batteries
Feature:Standard CC. charging process. Build-in MCU controller, -dV cut-off typical precision is 5mV per cellDesigned for 3~4 series NIMH and NICD batteryBi-color LED indicator, easily know the charging process: Red for charging, Green for charged.Protection mode for battery polarity reversed or the output connectors shorted.UL, CE approval (EN60335-2-29 and UL1310)
Specification for P2012-N4
Input Voltage | 100-240VAC, 50-60Hz | ||
Input Current | 0.2A rms | ||
Back current drain | 1.3mA | ||
Charge voltage limited | P2012 -N4 (Suit for 3~4s) | P2012 -N6 (Suit for 5s~6s) | P2012 -N10 (Suit for 7s~10s) |
6.4V | 9.8V | 15.5V | |
Bulk chare current | 1A~2A, required by user | 1A~2A, required by user | 0.8~1.5A, required by user |
Trickle charge current | < 0.12A (average) | < 0.1A (average) | < 0.07A (average) |
Operate Temperature | -20℃~50℃ | ||
Cooling | Natural convection. Do not cover the charger. | ||
Charge principle | Bulk CC—Trickle | ||
Battery type | 3~4 Series 3.6V~4.8V NIMH and NICD battery pack | ||
Battery capacity | 1000mAh--10000Ah | ||
Size | 81X43X30mm | ||
Output cable and plug | 1.2 meter 2xAWG22#, UL2468 wire, 5.5x2.1x10mm plug | ||
Input plug | US or VDE | ||
Enclosure | ABS+PC Plastic housing | ||
Weight | 100g |