Rechargeable lithium batteries (lithium-ion batteries, lithium iron phosphate batteries, and manganese lithium batteries) and Lead-acid battery
• Built in 4-stage charging (lithium battery) and 3-stage charging (lead-acid)
• Worldwide 90-264Vac input
• Built in active power factor correction function
• Multiple protection functions: output short circuit protection/output overvoltage protection/internal overheating protection/battery reverse polarity protection
• Waterproof: IP68
• Rechargeable lithium batteries (lithium-ion batteries, lithium iron phosphate batteries, and manganese lithium batteries) and Lead-acid battery
• Built in 4-stage charging (lithium battery) and 3-stage charging (lead-acid)
• Worldwide 90-264Vac input
• Built in active power factor correction function
• Multiple protection functions: output short circuit protection/output overvoltage protection/internal overheating protection/battery reverse polarity protection
• Waterproof: IP68
• Radio system backup
Electric scooter
Monitoring system
Electric motorcycles
Electric cleaning vehicle
Electric golf cart
Spec(LiFePo4 Charger)
Item | WP1200-288360 | WP1200-360300 | WP1200-432277 | WP1200-576200 | WP1200-720166 | ||
Output | Charge Voltage | 28.8V±1% | 36.0V±1% | 43.2V±1% | 57.6V±1% | 72.0V±1% | |
Charger Voltage range | 20.0-28.8V | 25.0-36.0V | 30.0-43.2V | 40.0-57.6V | 50.0-72.0V | ||
Charge current | 36.0A±10% | 30.0A±10% | 27.7A±10% | 20.0A±10% | 16.6A±10% | ||
Pre-charge current | 7.2A±10% | 6.0A±10% | 5.54A±10% | 4.0A±10% | 3.32A±10% | ||
End Charge | ≤3.6A ±10% | ≤3.0A ±10% | ≤2.77A ±10% | ≤2.0A ±10% | ≤1.66A ±10% | ||
Rated Output power | 1036.8W | 1080W | 1196.64W | 1152W | 1195.2W | ||
Fit battery capacity(Note 3) | 80 - 200Ah | 80 - 200Ah | 60 - 150Ah | 40 - 100Ah | 30 - 80Ah | ||
Battery leakage current(typical) | ≤1mA | ||||||
Indication | LED | Red light charging, green light fully charged or standby | |||||
Input | Rated input voltage | 100 - 240VAC 50 / 60Hz | |||||
Input voltage range (Note 4) | 90 - 264VAC | ||||||
Power Factor | PF>0. 96 @Full load | ||||||
Input Current | 14A@100VAC | ||||||
Impulse current | cold start 75A @230VAC | ||||||
standby power | < 6W | ||||||
efficiency | 92% | 92% | 93% | 93% | 93% | ||
Protection function | Short circuit protection (Note 5) | Internal relay closed | |||||
Output overvoltage protection | Internal relay closed | ||||||
reverse polarity protection | Internal relay closed | ||||||
Over Temperature Protection | Turn off the output and automatically recover after the temperature is normal | ||||||
Environment | operation temperature | -10 - +40℃ (Reference Derating Curve) | |||||
Working humidity | 0 - 90% RH | ||||||
Storage temperature and humidity | -40 - +70℃, 0 - 95% RH | ||||||
Cooling method | fan cooled | ||||||
Anti vibration | 10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes | ||||||
Safety&Electromagnetic Compatibility (Note 6) | Maximum temperature rise | < 30℃ (Surface) | |||||
Isolation withstand voltage | i/p to o/p: 3000V (1 min) | ||||||
safety standards | IEC62368 | ||||||
EMC interference | Item | Standard | Degree | ||||
conduct | EN55032 FCC PART15 | Class B | |||||
radiation | EN55032 FCC PART15 | Class B | |||||
harmonic current | EN61000-3-2 | ..... | |||||
Flicker | EN61000-3-3 | ..... | |||||
EMC immunity | EN61000-4-2,EN61000-4-3,EN61000-4-4,EN61000-4-5,EN61000-4-6,EN61000-4-8,EN61000-4-11 | ||||||
Other | mean time between failures | 30000H | |||||
Size | 288*168*89mm (L*W*H) | ||||||
Weight | 4300g | ||||||
Note | 1. To modify different battery specifications and parameters, please contact the battery supplier for details.
2. Parameters not specifically mentioned are measured at 230VAC input, rated load, and ambient temperature of 25 ℃.
3. This is the range recommended by Gu Run. For maximum charging current, please consult the battery supplier.
4. Derating may be required under low input voltage, please refer to the derating curve for details.
5. This protection mechanism is specified for situations where a short circuit occurs after the charger is connected.
6. The battery charger is considered as an independent device, but the final device still needs to reconfirm that the entire system complies with EMC directives. | ||||||
Item | WP1200-296360 | WP1200-444270 | WP 1200-592200 | WP1200-740160 | WP1200-888130 | ||||||
Output | Charge Voltage | 29.6V±1% | 44.4V±1% | 59.2V±1% | 74.0V±1% | 88.8V±1% | |||||
Charger Voltage range | 20.0-29.6V | 30.0-44.4V | 40.0-59.2V | 50.0-74.0V | 60.0-88.8V | ||||||
Charge current | 27.6V±1% | 41.4V±1% | 55.2V±1% | 69.0V±1% | 82.8V±1% | ||||||
Pre-charge current | 36.0A±10% | 27.0A±10% | 20.0A±10% | 16.0A±10% | 13.0A±10% | ||||||
End Charge | ≤7.2A ±20% | ≤5.4A ±20% | ≤4.0A ±20% | ≤3.2A ±20% | ≤2.6A ±20% | ||||||
Rated Output power | 1065.6W | 1198.8W | 1184W | 1184W | 1154.4W | ||||||
Fit battery capacity(Note 3) | > 200Ah | >150Ah | 100 - 200Ah | 80 - 150Ah | 60 - 130Ah | ||||||
Battery leakage current(typical) | ≤1mA | ||||||||||
Indication | LED | Red light charging, green light fully charged or standby | |||||||||
Input | Rated input voltage | 100 - 240VAC 50 / 60Hz | |||||||||
Input voltage range (Note 4) | 90 - 264VAC | ||||||||||
Power Factor | PF>0. 96 @ Full load | ||||||||||
Input Current | 14A@100VAC | ||||||||||
Impulse current | cold start 75A @230VAC | ||||||||||
standby power | <6W | ||||||||||
efficiency | 92% | 92% | 93% | 93% | 93% | ||||||
Protection | Short circuit protection (Note 5) | Internal relay closed | |||||||||
Output overvoltage protection | >15.5V*N | ||||||||||
reverse polarity protection | Internal relay closed | ||||||||||
Over Temperature Protection | Turn off the output and automatically recover after the temperature is normal | ||||||||||
Environment | operation temperature | -10 - +40℃ (Reference Derating Curve) | |||||||||
Working humidity | 0 - 90% RH | ||||||||||
Storage temperature and humidity | -40 - +70℃, 0 - 95% RH | ||||||||||
Cooling method | Fan cool | ||||||||||
Anti vibration | 10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes | ||||||||||
Safety&Electromagnetic Compatibility (Note 6 | Maximum temperature rise | < 30℃ (Surface) | |||||||||
Isolation withstand voltage | i/p to o/p: 3000V (1 min) | ||||||||||
safety standards | IEC62368 | ||||||||||
EMC interference | Item | Standard | Degree | ||||||||
conduct | EN55032 FCC PART15 | Class B | |||||||||
radiation | EN55032 FCC PART15 | Class B | |||||||||
harmonic current | EN61000-3-2 | ..... | |||||||||
Flicker | EN61000-3-3 | ..... | |||||||||
EMC immunity | EN61000-4-2,EN61000-4-3,EN61000-4-4,EN61000-4-5,EN61000-4-6,EN61000-4-8,EN61000-4-11 | ||||||||||
Other | mean time between failures | 30000H | |||||||||
Size | 288*168*89mm (L*W*H) | ||||||||||
Weight | 4300g | ||||||||||
Note | 1. To modify different battery specifications and parameters, please contact the battery supplier for details.
2. Parameters not specifically mentioned are measured at 230VAC input, rated load, and ambient temperature of 25 ℃.
3. This is the range recommended by Gu Run. For maximum charging current, please consult the battery supplier.
4. Derating may be required under low input voltage, please refer to the derating curve for details.
5. This protection mechanism is specified for situations where a short circuit occurs after the charger is connected.
1. 6. The battery charger is considered as an independent device, but the final device still needs to reconfirm that the entire system complies with EMC directives. | ||||||||||